Provision your first server for LaunchWP

Once you’ve signed up for LaunchWP, and you’re ready to start launching your WordPress sites, the first thing to do is to click Provision a new Server from the dashboard.

You’ll need to choose a provider to host your new server. You can connect with any cloud provider in the world, as long as you can SSH to the server. We have covered how to connect to the Server with LaunchWP in a separate article: #link-to-be-added.

Below are steps of different cloud providers, on how to prepare/provision/ready your server before connecting to LaunchWP.

• DigitalOcean Droplet
• Vultr
• Hetzner
• Akamai/Linode
• AWS Lightsail
• AWS EC2
• Google Cloud Compute
• Any other providers

Connect LaunchWP with DigitalOcean Droplet

Step 1 — Creating a DigitalOcean account

To access the DigitalOcean Control Panel and create a Droplet, you need a DigitalOcean account. To create a new account, navigate to the DigitalOcean new account registration page. You can choose to register through email, Google, or GitHub.

After you’ve confirmed your account, you will need to enter your credit card or Paypal information. This information is collected to verify identity and keep spammers out. You will not be charged until you choose a plan and confirm your subscription, which we will cover in Step 4. You may see a temporary pre-authorization charge to verify the card, which will be reversed within a week.

Once your information has been accepted, you will be taken to a window that says “Registration Complete”. You are now ready to proceed to the next step.

Step 2 — Setting Up Your Droplet

In the previous step, you should have been taken to a window that says “Registration Complete” with a “Let’s make something” button. Click on the “Let’s make something” button. The next window will display buttons for different Droplet options. Click on the “Go to Control Panel” link at the bottom:

Once you click on the “Go to Control Panel” link, you will be taken to the control panel.

Navigate to the “Create” menu in the upper right corner and click “Droplets” to open the Droplet create page. If you don’t have any Droplets, the Resources tab displays a large, blue “Get Started with a Droplet” button, which takes you to the same Droplet create page.

The Droplet create page is where you choose your Droplet’s configuration, like its operating system, how much memory it has, and which features (like backups or monitoring) to enable.

In the next step, you will choose an image of the operating system to be installed on your Droplet.

Step 3 — Choosing an Image

An image is a copy of an operating system. To create a Droplet, users need to pick an image of an operating system to run their server. DigitalOcean offers five different Linux operating system distributions. As this tutorial is for setting up an Ubuntu, click on the option for Ubuntu(LTS) x 64:

After selecting your operating system, you are ready to proceed to the next step.

Step 4 — Choosing a Plan

In the Choose a plan section, you can choose the amount of RAM, storage space, and CPU cores your Droplet will have. If you are following this tutorial for the Introduction to the Cloud Curriculum, the Basic $5 per month plan will work for the Curriculum’s hands-on tutorials and exercises.

Click on the option for the Basic $5/mo plan:

After selecting a plan, you are ready to proceed to the next step.

Step 5 — Adding Block Storage (Optional)

This option allows users to add block storage as independent volumes that can be moved from one Droplet to another within the same region. Block storage is useful when you need additional file storage space for your Droplet. If you are following this tutorial for the Introduction to the Cloud Curriculum, you do not need to add block storage. Leave this option unselected unless you want to add block storage.

You are now ready to proceed to the next step.

Step 6 — Choosing a Datacenter Region

In the Choose a datacenter region section, select the region where you want to create your Droplet.

A good default will be preselected for you, but for the best performance and minimal latency, choose the data center nearest to you and your users.

Once you have selected your data center, you are ready to proceed to the next step.

Step 7 — Selecting Additional Options

In the Select additional options section, you can enable several optional services that add functionality to your Droplet.

The three features available in this section are free, so enabling them does not increase the Droplet’s monthly cost. They can be understood as follows:

IPv6 enables IPv6 access for your Droplet. IPv6 is the most recent version of the Internet Protocol, which identifies computers on networks and routes traffic across the Internet. IPv6 addresses provide more address space than their IPv4 counterparts and are part of an effort to sustain the growth and deployment of Internet-ready devices.

User data is arbitrary data that you specify which is written to the user-data field of the DigitalOcean metadata service. To learn more about the purpose of user data, you can visit the User Data product documentation.

Monitoring adds the DigitalOcean agent to collect extended metrics and create alert policies. To learn more about monitoring, you can visit the Monitoring product documentation.

You can leave these options blank unless you’d like to enable them. Once you’ve selected your desired options, you are ready to proceed to the next step.

Step 8 — Setting Up SSH Authentication

In this section, you will set up SSH authentication for your Droplet using the pair of SSH keys you created as one of the prerequisites for this tutorial. If you did not already create SSH keys, you will be able to do so in just a few moments.

Click on the option to use SSH keys for authentication, which is more secure than a password. Then click on the “New SSH Key” button:

A pop-up window will appear, prompting you to copy your public SSH key and paste it into the provided space:

To copy your public key, run the following command in your terminal:

cat ~/.ssh/id_rsa.pub

Copy the output from your terminal and paste it into the space provided by the cloud panel pop-up window. Then give your key a name so you can select it later on. When you have finished, click “Add new SSH key”. You will then return to the cloud panel where you can make sure your new key is selected.

When you have selected your new key, you are ready to proceed to the next step.

Step 9 — Finalizing and Creating Droplet

In this final section of the Droplet creation process, you have the option to:

• Select the number of Droplets you wish to create. If you are following this tutorial as part of the Introduction to the Cloud Curriculum, you need to only create one Droplet. Otherwise, select your desired amount of Droplets.
• Name the Droplet. You can use the automatically-generated name or create your own name.
• Add tags to help organize your Droplets. You can leave this option blank if you wish.
• Assign your Droplet to a project to help with organization. A default folder will be created and selected here. You can create new folders later if you wish.
• Add backups. This option enables a system-level backup of your Droplet to help prevent data loss. Note that choosing this option adds $1 to your cost per month. Choose this option if you wish.

When you are finished making your choices, click “Create Droplet.” You will then be taken to a page showing a progress bar for the Droplet creation process. When the Droplet is ready, its IP address will be displayed:

You will use this IP address to securely connect with the Droplet through your terminal. Copy the IP address and then run the following command in your terminal to securely connect with your Droplet via SSH as a root user.

ssh root@your_IP_address

The terminal will then display a message like this:

Output
The authenticity of host '167.172.146.33 (167.172.146.33)' can't be established. ECDSA key fingerprint is SHA256:+Mx4ID5k4N8H7R24y+APZAoTe69hmAh9qMawyf/Lq9U. Are you sure you want to continue connecting (yes/no/[fingerprint])?

Type yes. If you chose a passphrase when setting up SSH, you will be prompted to enter it here. If everything is working, you will then be logged into your Droplet as a root user. Note that it is strongly recommended to create a new user with fewer privileges for the day-to-day use of your Droplet to avoid making irreparable changes. To create a new user, you can follow our Initial Server Setup Guide guide, which is the next tutorial in the Introduction to the Cloud Curriculum.